Description
The RPM Mega Bearing Blaster picks up where our original Bearing Blaster leaves off. Designed for larger bearings up to 1.25″ (32mm) in diameter, it’s the perfect cleaning tool for 1/5-scale R/C vehicles, rollerblades, inline skates, skateboards and anything using the popular 608 bearing.
Compact in size but huge in performance, the Mega Bearing Blaster cleans bearings faster and more effectively than traditional soaking methods. Instead of letting dirt sit in solvent, it uses pressurized cleaner to blast grit, grease and debris straight through the bearing for results you can see in seconds.
Using it couldn’t be easier. Remove the bearing shields, place the bearing on the center cone, reinstall the top, insert the spray tube from your favorite bearing cleaner (not included), and hit the spray button. In just a few seconds, your bearings come out clean and ready for the next step.
The enclosed cleaning chamber keeps overspray contained, reducing mess while protecting your hands and face from cleaner and debris. When you’re finished cleaning, switch to a lightweight bearing lubricant and use the same tool to lubricate the bearing just as quickly.
Small enough to fit in any toolbox and powerful enough to handle your biggest bearings, the RPM Mega Bearing Blaster delivers the fastest, cleanest and easiest way to keep your bearings running like new.
Tech Notes: The RPM Mega Bearing Blaster works on bearings with a minimum inside diameter of 3/16” (5mm) and a maximum outside diameter of 1.25” (32mm).
