|
|
 |

Head Guard for Traxxas
2.5 Engine Heads
The RPM Head Guard was designed to withstand
the toughest of rollover crashes and beg for more. Our head protector has
an additional 0.100” or almost 1/8” of additional thickness on top to
add extra skid and impact resistance to the fragile cooling fins of the
stock Traxxas 2.5 head. Additionally, our Head Guard has a positive
locking system that absolutely will not allow the Head Guard to pull
itself free during a crash.
The
RPM Head Guard is designed specifically for the Traxxas 2.5
stock engine head which is currently used in many Traxxas models including
the Revo, Jato, T-Maxx, S-Maxx, SportMaxx, Nitro
4-Tec 2.5, & Nitro Rustler 2.5. The RPM Head
Guard comes with a full set of screws as well as complete installation
instructions. They are available in Black, Blue,
& Dyeable
Silver and are molded in our trademark blend of
bulletproof nylons for strength and durability unmatched by any other
material on the market!
Tech Note: There are many manufacturers producing aftermarket heads that fit
the Traxxas 2.5 engine but the RPM
Head Guard has only been tested and guaranteed to fit stock Traxxas 2.5
& 2.5R heads.
|
80502 |
Head
Guard - Black  |
|
80505 |
Head
Guard - Blue  |
|
80506 |
Head
Guard - Dyeable
Silver
 |
Suggested Retail $3.95
Back to Top
Electric Rustler, Stampede
& Bandit Sealed
Gear Cover
The RPM gear cover for the electric versions of the Traxxas
Rustler, Stampede & Bandit come in Black & Blue
and are molded from RPM's
blend of bulletproof nylons. In addition, check out all of these other
cool features that the stock gear cover doesn't include:
- An oversized access hole and
soft plug for Traxxas owners that have upgraded to a slipper clutch.
- Completely sealed. Stock gear
covers have a large, open gap between the spur gear and the out-drive
that allows gear blowing dirt to enter.
- Sleek contours that would
look great on any vehicle.
- More clearance for larger
pinions for owners hungry for speed.
- Retains all stock geometry
for easy bolt up; no cutting or gluing required.
Not only do they look great,
they will protect those expensive gears like nothing else available! RPM's
new gear cover will pay for itself the very first time you run through the
dirt and nothing enters your gear case. No more blown gears from rocks and
debris!
| 80402 |
Black
Sealed Gear Cover for Traxxas Electric Rustler, Stampede &
Bandit  |
| 80405 |
Blue
Sealed Gear Cover for Traxxas Electric Rustler, Stampede &
Bandit  |
| 80407 |
Yellow
Sealed Gear Cover for Traxxas Electric Rustler, Stampede &
Bandit - Discontinued |
| 80408 |
Purple
Sealed Gear Cover for Traxxas Electric Rustler, Stampede &
Bandit  |
Tech Notes: Not recommended
for spur gears larger than the stock 87 teeth. XL-5 & VXL versions of the
Rustler and Stampede may need some slight modification of the motor shaft's length to fit under the RPM gear cover.
Stock Traxxas wheelie bars may not work in conjunction with an RPM
Gear Cover.
Suggested Retail $5.95

|
|