RPM is a proud American manufacturer designing AND manufacturing 100% of our molded products right here in the USA!
We have received numerous requests for a set of extended rear A-arms to fit the Traxxas Summit and Revo. When you speak, RPM listens. As a result of your requests, our extended rear A-arms for the Traxxas Summit and Revo are now available.
RPM extended rear A-arms are designed around our already solid and proven Revo rear A-arm design. That means you get an ultra lightweight set of A-arms that are nearly indestructible! Each set of RPM extended rear A-arms incorporates all stock geometry including options for either a 10mm or 19mm extension.
All RPM molded products are backed by our limited lifetime warranty against breakage and are molded in black or blue. For unmatched performance, reliability you can trust and unmatched durability, you can’t go wrong with a set of RPM A-arms installed on your ride!
Tech Notes: RPM Extended Rear A-arms are replacements for Traxxas stock #5333R. 6mm bumper mount spacers (not included) and M3 x 16mm screws (not included) may be necessary if installing these in place of standard wheelbase a-arms. Please review the installation instructions at the link below for technical information regarding the installation of these a-arms.
Suggested Retail Price
|70372||Summit, Revo & E-Revo Front Left A-arms - Black|
|70375||Summit, Revo & E- Revo Front Left A-arms - Blue|
|80212||Summit, Revo & E-Revo Front Right A-arms - Black|
|80215||Summit, Revo & E-Revo Front Right A-arms - Blue|
RPM Rod Ends for Associated and Losi vehicles have been some our best selling RPM parts for over 2 decades! That same engineering, combined with RPM bulletproof materials, has gone into the creation of RPM Rod Ends for Traxxas 1/10th scale vehicles. These rod ends are tough! The area around the ball stud is thicker than the stock rod end while still allowing a full range of motion of the pivot ball.
shank has been redesigned with a pair of flats, making the rod end much
easier to work with (versus the stock, round shank). RPM rod
ends are sold in sets of twelve to complete most vehicle needs.
Rod Ends cover a wide range of currently available Traxxas vehicles
including all versions of the following: Slash 2wd, Slash 4x4, Summit,
T-Maxx, E-Maxx, Revo, e-Revo, Slayer Pro 4x4, Stampede 4x4, Rustler VXL,
Jato and Bandit VXL.
Tech Notes: RPM short rod ends replace Traxxas stock #5347 while RPM long rod ends replace Traxxas stock #5525. Both versions are sold without pivot balls. Stock Traxxas pivot balls are required for completion.
Short Rod Ends - Dyeable White
|80472||Traxxas Short Rod Ends - Black|
Short Rod Ends - Green
- Available 02.05.14
|80475||Traxxas Short Rod Ends - Blue|
Rod Ends - Dyeable White
|80512||Traxxas Long Rod Ends - Black|
Rod Ends - Green
- Available 02.05.14
|80515||Traxxas Long Rod Ends - Blue|
Short - $8.95 / set of 12
Long - $9.95 / set of 12
Front and Rear Bumper Mounts
RPM bumper mounts for the Traxxas Summit are designed to absorb serious impacts while transferring minimal impact energy into the more fragile components of the truck.
engineers utilized the same design improvements that make our Revo
bumper mounts so strong and incorporated them into our Summit
bumper mounts to add some much needed strength and durability to this
highly capable truck. Both the front and rear RPM bumper
mounts were widened (the front more so than the rear) to allow the bumper
mount material more flexing room. We also curved the center connecting rib
to allow the bulkhead mounting
points the ability to rotate at the mounting screws, allowing more impact
absorption and less energy transference. Our last major design improvement
is the one everyone is most familiar with – RPM
custom-blended nylon! Our material is the toughest stuff out there with
just the perfect blend of rigidity, flexibility, durability and memory.
quality counts and protection is needed most, RPM is the
company to turn to for the ultimate in American designed and American made
aftermarket R/C products!
Tech Notes: RPM Bumper Mounts replace Traxxas stock #5635 – front and #5636 – rear (Bumper not included).
|80932||Summit Front Bumper Mount|
|80992||Summit Rear Bumper Mount|