Motor Protector for Traxxas Vehicles
- fits the Traxxas Bandit, e-Rustler & e-Stampede
- also fits the Slash if the stock bumper is removed
Many Traxxas electric vehicles have a motor that is dangerously exposed to impacts and damage from rear impacts or collisions. Our new rear Motor Protector eliminates that problem! How did we solve it? We started with an RPM rear bumper mount / wheelie bar mount (RPM #80902 or #80905) and extended the reach with this simple add-on piece, which completely blocks the motor from most rear impacts. A stock Traxxas rear bumper mount / wheelie bar mount - Traxxas #3677 - can be used with this motor protector as well.

Traxxas Slash owners running in the unlimited class or those that simply want to drop a huge amount of rear end weight can eliminate the stock rear bumper and mount the RPM Motor Protector in place of the stock bumper to prevent damage to the end-bell and motor.

For the ultimate in rear end protection, a second motor protector can be bolted to the opposite side of the rear bumper mount / wheelie bar mount (gear cover side) to help protect the gears and gear cover from extreme rear-end impacts.

The RPM motor protector can be used on any vehicle that can run the Traxxas #3677 rear bumper mount / wheelie bar mount including the Bandit, e-Stampede, e-Rustler & Slash as well as a number of Traxxas legacy models. Our Motor Protector is molded from our ultra-durable blend of nylons and is backed by our limited lifetime warranty.

Tech Notes: The RPM Motor Protector cannot be used in conjunction with a Slash rear bumper or Traxxas wheelie bar. It must be used in place of either the bumper or wheelie bar. A Traxxas rear bumper mount / wheelie bar mount (Traxxas #3677) or an RPM rear bumper / wheelie bar mount (RPM #80902 or #80905) must be installed prior to installing the RPM Motor Protector (not included).

80912	Black Motor Protector
80915	Blue Motor Protector

Suggested Retail  $6.95 ea. (mount not included)

Back to Top

Mount for a Rear Bumper or Wheelie Bar
- fits the Traxxas Slash, e-Rustler, e-Stampede & Bandit
After hearing numerous requests to look into the rear bumper mount on the Traxxas Slash, we found several issues that could use the RPM touch. Those same problems were encountered on e-Rustler, e-Stampede & Bandit vehicles using the stock wheelie bar mount. The problem – the stock mount uses only a single screw on the gear cover side to hold the mount in place. That causes a hinge effect under rear impacts causing the slotted area holding on to the rear skid plate to pop off after an impact, leaving the stock bumper / wheelie bar mount hanging under the chassis. The RPM solution… An all-new bumper mounting system that eliminates all of the problems encountered with the stock version.

The RPM rear bumper / wheelie bar mount has two mounting holes on the gear cover side and three on the motor side – that’s two additional mounting points to eliminate that annoying hinge effect mentioned above. The additional mounting screws help disperse impact energy into the transmission case over more surface area, reducing the possibility of damaging the case significantly! The new RPM mount design means no more slotted parts hanging below the rear skid plate – ever! Our mount tucks up quite nicely behind the skid plate for better rear end ground clearance.

Our rear bumper / wheelie bar mount fits a wide range of vehicles too. It fits all versions of the Traxxas Slash, electric Stampede, electric Rustler and Bandit including VXL, XL-5 and legacy versions.

Tech Notes: The RPM Rear Bumper Mount replaces Traxxas #3677.

 

80902	Black Rear Bumper Mount for the Traxxas Slash
80905	Blue Rear Bumper Mount for the Traxxas Slash

Suggested Retail  $9.95 ea.

Back to Top

Wide Front Bumper for the Traxxas Rustler & Stampede
(fits the Nitro Sport and Bandit as well)
Give that Traxxas Nitro or Electric Rustler, Stampede, Nitro Sport or Bandit added protection with the RPM wide front bumper. This bumper stands six inches wide and adds an extra 1-1/2" worth of bulletproof, RPM protection to the front end of the vehicle. RPM designed this bumper with the backyard basher in mind by making it with our guaranteed unbreakable blend of nylons and is molded in black to give it that stock-looking appearance, or in optional blue for a more contrasting appearance. These bumpers will help reduce front end damage during head on collisions with curbs, trees, etc.! Nothing surpasses the protection gained when your Traxxas vehicle is protected with an RPM wide front bumper!

 

81162	Wide Front Bumper - Black
81165	Wide Front Bumper - Blue

Suggested Retail  $6.95

Back to Top

Quick Adjust Spring Clips

Accuracy is the key to a proper suspension setup. With RPM’s clips, accuracy becomes as close to perfect as you can get! The set includes four spring collars that mount on top of each spring to prevent the spring from rubbing the shock body, and a full set (4 ea.) of four different thickness clips that snap around the shock body. With this set, you can set your shock collars once, and never touch them again!

70322	Quick Adjust Spring Clips For Traxxas & Losi Shocks - Black
70325	Quick Adjust Spring Clips - Blue (Fits all Traxxas & Losi Shocks)
70327	Quick Adjust Spring Clips - Yellow (Fits all Traxxas & Losi Shocks)
70328	Quick Adjust Spring Clips - Purple (Fits all Traxxas & Losi Shocks

Suggested Retail $5.95

Back to Top

Lower Spring Cups
RPM spring cups hold the base of the shock spring in place better than the stock parts and, because of our killer material, also tend to stay cleaner. In addition, coupled with the above mentioned spring clips, anyone can add a whole new dimension of color to their favorite Traxxas or Losi vehicle! These lower spring cups also fit the Associated MGT. Nothing looks better than a complete suspension set-up dressed up with RPM team colors! RPM spring cups are available in Bold Black, Blue, Yellow and Purple!

73152	Lower Spring Cups for most Losi, Traxxas, & Assoc. MGT Shocks - Black
73155	Lower Spring Cups for most Losi, Traxxas, & Assoc. MGT Shocks - Blue
73157	Lower Spring Cups for most Losi, Traxxas, & Assoc. MGT Shocks - Yellow
73158	Lower Spring Cups for most Losi, Traxxas, & Assoc. MGT Shocks - Purple

Suggested Retail  $2.95

Two Stage Shock Pistons (Light - Medium)

True performance lies in the ability to dial in your suspension. If you’re an intermediate to expert suspension technician, then you have the ability to take your suspension to a new level. Introducing RPM’s two stage shock pistons. In a compressed state, the two halves press together to meter the shock fluid through two holes. As the suspension unloads (in the standard config.), the two plates separate, allowing the fluid to flow through multiple holes, which returns the shock to static position at a higher rate. These pistons are the closest things that R/C can get to full sized racing. Don’t be fooled, even the fastest racers in the world are using them, the trick is to get them to admit it! After all, if everyone used them, who would gain the advantage? Maybe you? They come in sets of 12, three sets of four pistons. (white, blue, & yellow) Best used on tracks with small to moderate obstacles and rough sections. Check out our Piston FAQ page for more information.
Important Note: These pistons only fit stock, molded Traxxas shock bodies. Some slight sanding with a fine grit sand- paper on the diameter of the pistons is required to get them to fit inside Traxxas Big Bore Shocks.

80420 Two Stage Shock Pistons (Light - Med. Dampening)   

Suggested Retail  $6.95

Two Stage Shock Pistons (Med. - Heavy)

This set uses the same advanced technology as #8042, although the dampening is heavier. This set also includes a set of twelve, three sets of four pistons. (red, green, & purple) Best used on tracks with moderate to major obstacles, or on heavier vehicles such as the Stampede, T-Maxx, & E-Maxx. Check out our Piston FAQ page for more information.
Important Note: These pistons only fit stock, molded Traxxas shock bodies. Some slight sanding with a fine grit sand- paper on the diameter of the pistons is required to get them to fit inside Traxxas Big Bore Shocks.

80430 Two Stage Shock Pistons (Med. - Heavy Dampening)  

Suggested Retail $6.95

Back to Top