Losi Shock Wrenches

Finally, an easy way of assembling and disassembling your shocks without scratching the coating on the shock bodies. Consisting of two molded nylon wrenches, one wrench holds the flange at the top of the shock body while the other fits on the lower cartridge.

Tech Note: These wrenches work with most Losi 1/10th scale shocks. They will not work on 1/8th scale shocks or monster truck shocks such as those found on the LST & LST2.

70732 - Shock Body & Cap Wrenches For Losi Shocks - Discontinued

Suggested Retail $4.95

Associated Shock Wrenches

Similar in nature to #70732, these tools are designed for Assoc. shocks. Designed to eliminate scratching the shock body, this two piece wrench set simplifies many aspects of shock assembly and disassembly. One wrench slides around the shock body hex while the other fits snugly over the shock cap. Accept no imitations of the original RPM shock wrenches!

Tech Note: These wrenches work with all versions of Associated 1/10th scale shocks including both aluminum and molded versions.

70781 - Shock Body & Cap Wrenches For Assoc. Shocks    

Suggested Retail $4.95

Back to Top

Body Post Hole Punch

What is the best way to put a hole through your Lexan body without creating fracture points? Use an RPM body post hole punch! Place a piece of wood under the place you have marked for a hole to go, put the hole punch over your mark, then hit the punch with a hammer! Bingo, a perfectly round hole with no fracture points! The punch is heat treated and, when used properly, will last a lifetime!

70880 - Body Post Hole Punch    

Suggested Retail $3.95

Back to Top

Metric Wheel Nut Wrenches

Simple in design yet versatile in its uses, RPM’s metric wheel nut wrench makes removal & installation of any 5.5mm & 7mm nuts (such as wheel nuts & shock retainer nuts) a snap. No more fumbling with big & bulky nut drivers anymore. Since both sizes are incorporated into one wrench, it takes up less space in your tool box and fits easily into your pocket for fast trackside adjustments & repairs.

70915 - Metric Wheel Nut Wrench (5.5mm & 7mm)    

Suggested Retail $4.95

Back to Top

Wheel/Shock Nut Wrench for Losi Vehicles

Similar in design to RPM’s #70915, this multipurpose wrench has been designed for both front & rear axle nuts on Losi vehicles. It too incorporates both sizes into a single wrench, eliminating the necessity of having two separate tools in your pit box! The small end has a 1/4" socket that is capable of removing & installing shock retainer nuts.

70932 - Wheel & Shock Nut Wrench For Losi Cars & Trucks  

Suggested Retail $4.95

Back to Top

Slipper Wrench for Associated and Losi Vehicles

RPM has maintained a constant vigil over the racer and when we saw that many of you had a problem adjusting your clutch while the wheels were on, we decided to make a special tool just for this purpose. Shaped like an "L", it has a 1/4" socket on both ends which allows fast, major adjustments with the long end or slow, critical adjustments with the short.

70962 - Slipper Wrench For Assoc. & Losi (1/4")    

Suggested Retail $3.95

Back to Top

Wheel/Shock Nut Wrench for Associated Vehicles

Similar in design to RPM’s #70915 & #70932, this multipurpose wrench has been designed for both front & rear axle nuts on Associated vehicles. It too incorporates both sizes into a single wrench, eliminating the necessity of having two separate tools in your pit box! The small end is capable of removing & installing shock retainer nuts.

70981 - Wheel & Shock Nut Wrench For Assoc. Cars & Trucks

Suggested Retail $4.95

Back to Top