RPM RC Products
Nav Bar Tabs


Team Losi Index

 
Ten-SCTE, Ten-T & 810 Rear Skid Plate  

 
Narrow Roof-Mounted Light Bar Set  

 
Wide Front Bumper for Losi XXX, XXX-T, & XXX-NT   

 
Cushioned Front Bumper for "XX" &"XXT"  

 
Snap Tite Body Savers  

 
Product Database  

 
 
 

Chassis and other Misc. Parts

Rear Skid Plate for the Losi Ten-SCTE
(also fits the Ten-T & 810)
Rear Skid Plate for the Ten-SCTE, Ten-T & 810
Protection is the key to survivability. Sadly, the aluminum chassis plate of the Losi Ten SCTE, Ten-T and 810 is completely unprotected against scrapes, scratches and impacts at either end of the truck. Our recent release of our #73042 Front Bumper & Skid Plate takes care of the front of the chassis (on the Ten-SCTE) while our #73082 Rear Skid Plate was designed to take care of protecting the back.

The RPM Rear Skid Plate for the Losi Ten SCTE, Ten-T & 810 is simple, yet cleverly designed with a sharp leading edge that transitions seamlessly through a large front radius and into a 5/32” thick skid / wear plate. The large front radius prevents objects from catching the front lip of the skid plate, allowing smooth transitions up and over anything sliding against the bottom of the vehicle. RPM nylons are integral to the design, providing unmatched abrasion and skid resistance for longevity and durability.

Don’t rely on a bare aluminum chassis as your rear skid plate. RPM is in the business to protect your ride so bolt us on and never look back!

 
73082 Rear Skid Plate for the Ten-SCTE, Ten-T & 810

Suggested Retail $7.95 / ea.

Back to Top


Wide Front Bumper
for the Losi Speed-T, XXX, XXX-T & XXX-NT
Wide Front Bumper for Losi XXX, XXX-T, & XXX-NTThe stock front bumper on the XXX series of vehicles is simply a miniature skid plate. It does nothing to help protect the front end of the vehicle. The RPM wide front bumper for the Losi XXX series of vehicles was designed to add in loads of bash-proof protection! At a full 6” in width, our bumper can handle some serious abuse! It extends far enough in front of the vehicle to absorb some of the most brutal impacts without transferring the major shock of the impact into the more fragile areas of the vehicle while extending rearward providing ample front-end chassis skid protection from hard landings. In addition, our front bumper has strengthening ribs built into it that have a multi-purpose design. The ribs not only add strength to the bumper, they act as low friction skid rails and they help protect the screw-heads holding the bumper to the bulkheads. RPM bumpers are built using our trademark blend of bulletproof nylons and are molded in black.

73602 Wide Front Bumper - Speed-T, XXX, XXX-T & XXX-NT    

Suggested Retail $8.95

Back to Top


Cushioned Front Bumper For "XX" & "XXT"
Cushioned Front Bumper For "XX" & "XXT"
This bumper does what a bumper is supposed to -- take impacts without transferring the force into the chassis components. The front edge of this bumper rolls up to give a cushioning effect and prevent the front of the vehicle from digging in off of the jumps. Bolts right on and acts as a front skid plate to protect the bulkhead.



73712 Cushioned Front Bumper For "XX" & "XXT"     Discontinued

Suggested Retail  $3.95

Back to Top


Snap Tite Body Savers
Snap Tite Body Savers

These body savers are similar to the #8030 except they fit the larger dia. posts (1/4") usually related to Losi vehicles and most sedan body posts. Molded in black or white dyeable nylon.

 


80302 Black Snap Tite Body Savers - 3/16" Dia. Posts         
80311 Dyeable Snap Tite Body Savers - 3/16" Dia. Posts    
80332 Black Snap Tite Body Savers - 1/4" Dia. Posts          
80341 Dyeable Snap Tite Body Savers - 1/4" Dia. Posts      

Suggested Retail  $2.95/set of 5

Back to Top


Home · About RPM · Products · New Products · F.A.Q. ·
Contact

©2012 RPM RC Products. All rights reserved.