RPM RC Products
Nav Bar Tabs


Associated Index

 
SC10 & T4 Rear A-arms  

 
RC10 Rear A-arms  

 
Carriers & 1/4" x 1/2" Bearings  

 
Rep. 1/4" x 1/2" Bearings  

 
Rep. Bearings for 3/16" Dia. Axles  

 
RC10T & GT Carriers  

 
10T, T2, & GT Rear Arms  

 
RC10GT Rear Bulkhead  

 
RC10GT
3 Degree Rear Mounts
 

 
Product Database  

 
 
 

Rear Suspension Parts

SC10 & T4 Rear A-arms
Blue Rear A-arms for the Assoc. SC10 & T4RPM SC10 / T4 A-arms were designed to solve critical durability issues stemming from stock rear A-arms. Our SC10 / T4 rear A-arms are designed to withstand some serious abuse!

Our A-arms are over 25% thicker around the hinge pins than the stock versions which translates into pure RPM muscle to help eliminate damage during those “Wow, did you see THAT crash!” moments. Other design improvements include angled leading and trailing edges of the A-arms, which help the A-arms transition up and over objects much better than the blunt surfaces of the stockers.

We also focused on the hinge pin retaining system used on the stock A-arms. Using a small screw hole so close to the hinge pin like the stock arms do weakens the A-arms. We moved the hinge pin retaining screws in-line with the hinge pins, significantly strengthening our A-arms in the process. By eliminating the smaller 2-56 hinge pin retaining screws, we’ve also eliminated the problem of the hinge pins falling out due to varying screw head diameters.

Black Rear A-arms for the Assoc. SC10 & T4Our final focus was on slop elimination. Our strict quality control allows us to tighten up all of our tolerances without fear of binding the suspension system. The final result is a smooth, free moving suspension system with minimal slop. Our tighter tolerances on our A-arms allows other critical adjustments such as camber and toe angles to be much more consistent, providing better and more consistent control of the SC10 or T4.

RPM SC10 / T4 A-arms come with all necessary mounting hardware and instructions. RPM SC10 / T4 A-arms are sold in pairs and are backed by our industry-leading breakage warranty.

Combine a set of RPM rear A-arms with a set of RPM fronts arms (#70762 or #70765) and if you crash, you’ll still finish your race, not your day!

70742 Assoc. SC10 / T4 Rear A-arms - Black     Available 11.26.09
70745 Assoc. SC10 / T4 Rear A-arms - Blue     Available 11.26.09

Suggested Retail  $10.95

Back to Top


RC10 Rear A-arms
RC10 Rear A-armsThese A-arms are the second set in our retro release to help all of those venerable, yet competitive RC10’s still running out there. Combine these with a set of our #70442 front A-arms and you’ll never have to worry about shelving your much loved RC10 because of an A-arm break. Sold in pairs and are molded in black.

70542 Assoc. RC10 Rear A-arms - Black    

Suggested Retail  $9.95

Back to Top


Carriers & 1/4" x 1/2" Bearings
Carriers & 1/4" x 1/2" Bearings for RC10GT & RC10T
Super-strong bearings that have three times the load rating of the stock bearings highlight this set of ultra-durable rear carriers. These bearings will hold up much longer for smoother and more dependable operation. RPM carriers are designed to remove most of the power-robbing, telescoping action of the dogbones (universal shafts).

RPM Recommendations: To prolong the life of your bearings, RPM recommends the use of our #81170 Bearing Blaster. For accurate camber adjustments, please consider the use of our #70992 Camber Gauge.


70232 Carriers & 1/4" x 1/2" Bearings for RC10GT & RC10T  

Suggested Retail  $29.95

Back to Top


RC10T & GT Carriers
These carriers are exactly the same as #7023 without the 1/4" x 1/2" bearings. Combined with #7028, this set will accommodate 3/16" dia. axles on your RC10T or GT.

70272 RC10T, GT Carriers (T2, & T3 when used with #7028 for 3/16" axles or #7024 for 1/4" axles)    

Suggested Retail  $7.95

Back to Top


Replacement 1/4" x 1/2" Bearings
Although built to last, our bearings will eventually wear out. This set of four bearings replace those found in #7023.

RPM Recommendations: To prolong the life of your bearings, RPM recommends the use of our #81170 Bearing Blaster. For accurate camber adjustments, please consider the use of our #70992 Camber Gauge.

70240 Replacement 1/4" x 1/2" Bearings (4)   

Suggested Retail  $24.95

Back to Top


Bearings For 3/16" Diameter Axles
At some point, the designers at Associated decided to change from 1/4" dia. axles to 3/16" dia. axles on their truck kits. In order to accommodate this change, RPM added this 3/16" x 1/2" bearing kit to our product line. Use this kit in conjunction with #7027 carriers only!

RPM Recommendations: To prolong the life of your bearings, RPM recommends the use of our #81170 Bearing Blaster. For accurate camber adjustments, please consider the use of our #70992 Camber Gauge.

70280 Bearings For 3/16" Diameter Axles (Use with #7027)   

Suggested Retail  $18.95

Back to Top


RC10GT, T2, & 10T Rear Arms
RCGT, T2, & 10T Black Rear ArmsAssociated GT Blue Rear A-arms
Broken A-arms will be a thing of the past when you install a set of RPM A-arms! Designed to be virtually indestructible as well as lighter than stock, RPM guarantees you will never break another arm again! RPM A-arms are molded in our tough, custom blended nylons and are available in either blue or black.

70302 RC10GT, T2, & 10T Rear Arms - Black    
70305 RC10GT, T2, & 10T Rear Arms - Blue     

Suggested Retail  $9.95 / pair

Back to Top


Rear Bulkhead for the RC10GT
Rear Bulkhead For RC10GTBlue Rear Bulkhead for the Associated GT
Gas-powered competition is brutal. The only way to survive is to be the toughest competitor out there. Nothing is tougher than RPM! RPM bulkheads are tougher than stock parts, lighter than aluminum, guaranteed not to break, will not bend out of shape, and are made from a tougher than stock material that allows a firmer feel when bolting the bulkhead to the chassis! Combine all that with some of the best prices in the industry and you have what RPM is all about. We strive to get you across the finish line every time without breaking the bank. Mount an RPM bulkhead to your ride and that’s one less thing you’ll ever have to worry about. Now available in a molded blue to match or contrast any paint or chassis color scheme.

70352 Rear Bulkhead For RC10GT - Black     Discontinued
70355 Rear Bulkhead For RC10GT - Blue      Discontinued

Suggested Retail  $8.95

Back to Top


RC10GT 3 Degree Rear Mounts
RC10GT 3 Degree Rear Mounts
RPM
’s reputation for quality plastics is what led us to recreate the stock rear mounts on this demanding vehicle. We retained all stock geometry while incorporating a third mounting hole that strengthens the mounts and helps secure the rear bumper in its place. Factory drivers swear by RPM mounts!

70532 Associated GT 3-Deg. Rear Mounts - Black   Discontinued
70535 Associated GT 3-Deg. Rear Mounts - Blue   Discontinued
70537 Associated GT 3-Deg. Rear Mounts - Yellow Discontinued

Suggested Retail  $5.95

Back to Top


Home · About RPM · Products · New Products · F.A.Q. ·
Contact

©2006 RPM RC Products. All rights reserved.