RPM RC Products
Nav Bar Tabs

RPM  Download Center  

 
Can I buy directly from RPM?  

 
How do I get an RPM Catalog?  

 
What is RPM's Warranty Policy?  

 
How do I Dye (color) My RPM Dyeable Parts?  

 
Which RPM Truck Wheels Fit My Vehicle?

 
How do I use the RPM Toe-In Gauge?  

 
What are the advantages of using the RPM Two Stage Shock Pistons?  

 
How do I add a ball hitch to my RPM rear bumper?  

 
What screws should I use to bolt my shocks to my new RPM T/E-Maxx 2.5 A-arms?  

 
How do I check camber & toe angles on vehicles with large tires?  

 
How do I fit RPM T/E-Maxx steering knuckles on my Assoc. MGT?  

 
What is the proper way to install & adjust my Losi LST Camber Rods in my RPM Adjustable Camber A-arms?  

 
How do I put air holes in my RPM wheels?  

 
How do I install a set of RPM Slash skid plates on my Stampede?  

 
How do I install a set of LED lights in my RPM light canisters?  

 
Send us your questions and comments  

 
Search  
 

Frequentlt Asked Questions

Q: What is the RPM warranty policy?
spacer.gif (55 bytes)
A:
It is a common misperception that RPM has a "no questions asked" warranty policy. Although we do have the best warranty in the R/C industry, it is not "no questions asked". The following text describes in detail what our warranty does and does not cover, subject to RPM final review.

Quick Links: Warranty Terms and Restrictions / Failures due to non-RPM parts / RPM Decorative Finishes / RPM Scale Accessories / RPM Wheels / Screw Holes / Hardware Failures / Discontinued Products / What you need to do / Return Shipping / International Customers / RPM Liability / Footnotes (1) / Footnotes (2)

Warranty Terms and Restrictions: If you manage to break an RPM molded product under normal operating conditions(1), we will replace that part at no further cost to you(2). Normal operating conditions covers most types of driving conditions that an unmodified, stock R/C vehicle would normally encounter, including most normal bumps, jumps, and road hazards. RPM will not warranty a broken or damaged part if it has been modified in any way (or if the part breaks due to modifications elsewhere on the vehicle that directly affects the RPM part in question). This includes, but is not limited to, drilling, grinding, filing, etc., nor will we warranty any part that has been worn out through extended use and / or abuse. In addition, it is nearly impossible to crush an RPM part under normal operating conditions, therefore crush damage of any sort will not be covered. Bending an RPM part until it can no longer function properly does not fall within warranty guidelines either. Please contact us in this situation. We may have a solution that can correct the problem without the item in question ever having to be sent in. Please use common sense to determine if the breakage was caused by a materials or workmanship issue. We take great pride in the engineering and craftsmanship that goes into each and every RPM part. Therefore, we take our customer service related issues just as seriously and we will do everything possible to resolve legitimate warranty related claims. RPM reserves the right to final judgment regarding all warranty issues. Every RPM part sent in for warranty review will be reviewed by a member of the RPM staff to determine whether or not the guidelines of the RPM warranty policy apply.

We test every part we build on a stock, unmodified vehicle. We can only guarantee the fit and performance of an RPM part based on the stock, unmodified vehicle. Any additional non-RPM parts or modifications made to your vehicle may affect the performance of any installed RPM products and can quite possibly void the RPM warranty. It is the responsibility of the vehicle's owner to determine whether or not additional non-RPM aftermarket items or physical modifications to the vehicle will affect the fit or performance of any RPM products installed.

Failures directly attributable to parts not made by RPM: If an RPM part becomes unusable due to the failure of a part not produced by RPM, the failure is not considered a warrantable issue. Failures in this category include but are not limited to; failures due to bent or broken hinge pins, shock shafts, axles, screws, pivot balls, and damage caused to RPM parts by trying to remove faulty or damaged parts, hardware, etc. not produced by RPM.

RPM Decorative Finishes: RPM does not normally warranty applied decorative finishes such as chrome, blue chrome, or purple chrome finishes unless the problem occurred prior to removing the product in question from the package.

RPM Scale Accessories: RPM scale accessories are designed for appearance only and are limited in the scope of their warranty protection. RPM scale accessories are warranted against materials and workmanship defects only. Each scale item we manufacture will have certain restrictions on certain aspects of the design (for example, on our roof light kits, full RPM warranty protection is available to light bar, light buckets and mounting system, but the lenses are material and workmanship only). If in doubt, please send us an e-mail for clarification.

RPM Wheels: RPM wheels can have up to three 1/8" diameter maximum air holes (3/32" maximum on 1/18th scale wheels) drilled into the wheel diameter but must be placed with extreme caution and care. Additionally, the holes must not contact any of the spokes or internal surfaces of the wheel. (Please click here to review our FAQ page on proper tire ventilation.) If the air holes are incorrectly drilled and lead to (or contribute to) the breakage of the wheel, RPM will not warranty that particular wheel. Tires must be glued to the wheel according to your vehicle manufacturer's instructions to be considered used "under normal operating conditions". Wheels that do not have tires glued to them and become damaged are not considered warrantable wheels. Wheels that have become creased, egg-shaped, or permanently misshapen are considered way beyond the scope of coverage of this warranty and will not be covered.

Screw Holes: RPM has no control over the type of hardware installed into the mounting holes nor do we have control over the amount of torque used to install the hardware on to our products. Due to these and other limiting factors, it is unreasonable to expect stripped holes to be covered under warranty. Thus, we do not normally cover any type of screw holes under the provisions of our warranty. Nearly all of the problems we have encountered regarding stripped screw holes in an RPM part come from not reading and following the instructions, over-torqued threads, customer modified parts, using the wrong hardware or using the wrong tools to install the hardware.

Included Hardware: Screws, ball bearings, nuts, washers, or any metal hardware included in any RPM package are not protected under RPM warranty provisions.

Discontinued Products: RPM cannot warranty products that are no longer supported or manufactured. We will do everything we can to supply a replacement part for a valid warranty request but if an item that has been damaged is discontinued and no longer supported by RPM, the warranty is considered void.

What you need to Do: If you are not sure if your problem is a legitimate warranty related problem, please contact us directly and ask. If you feel you have a legitimate warranty related item, do not return your RPM part to where you purchased it. Please send the damaged item directly to us with a brief, legible, yet thorough explanation of what you think may have happened to the part, a contact phone number and an e-mail address in case we have questions and your return mailing address to;

RPM R/C Products
14978 Sierra Bonita Ln.
Chino, CA 91710
U.S.A.

Do not send in any additional non-RPM items such as tires (tires must be removed from damaged wheels before being sent in), screws, hinge pins, etc. They will not be returned without incurring return shipping fees.

Once we receive the damaged RPM part and we determine that it is a valid warranty claim, we will usually send out a replacement the following business day. The faster you get a part to us for replacement, the faster we can get a replacement or response back to you.

Return Shipping: Please understand that most postal services take some time to ship us your parts (7-10 working days in the continental U.S.) and RPM sends all returning product via the USPS so please be patient. We will send your parts or a response back to you as quickly as possible. Before contacting us to ask where your replacement part is, please refer to our normal operating hours. If it is a holiday or a weekend, you will not receive a response until we return - usually, you will have received your replacement by then anyway.

International Customers: You must send your warranty requests directly to RPM. Do not return the damaged item to the place where you purchased your RPM parts. Additionally, due to possible customs delays, we cannot give estimated warranty return times.

RPM Liability: RPM will only replace the original, damaged RPM product that has been determined to be covered under the provisions of this warranty. Any other products not produced by RPM that are damaged due to a failure of an RPM product are not the responsibility of RPM and will not be reimbursed or replaced under warranty guidelines. It is your responsibility to get the damaged RPM part in to us. We cannot be held liable for product that does not make it to us. If we haven't contacted you regarding a part you sent in, it is most likely because we did not receive the part in question. Contact the shipping company you used to find out what may have happened.

(1) RPM refers to "normal operating conditions" as normal use of a vehicle for an average user with an unmodified, stock vehicle. RPM parts that are damaged due to excessively tall jumps (or high falls), abnormally fast (or heavily modified) vehicles / runaway vehicles, or run-ins with full sized vehicles are not considered used under "normal operating conditions" and may not be covered under RPM warranty provisions, nor will RPM cover damage inflicted upon an RPM part due to the failure of other products not produced by RPM such as bent or broken hinge pins, shock shafts or axles, etc. Additionally, BMX Tracks, Skate Parks and other such areas dedicated to non-R/C related hobbies are not considered normal operating environments and any RPM parts broken in those types of locations may not be covered. Intentionally damaged parts will never be covered under warranty protection (don't do it - we know what we are looking at and we will check). RPM parts used on "for profit" vehicles, such as rental or demonstration vehicles, are not covered under the provisions of the RPM warranty program. If in doubt, please ask.

(2) The only costs you may incur will be in sending the damaged part to us. The customer will bear the responsibility for the freight charges and the risk of loss on all returned shipments. All return shipments should be made with carriers that offer tracking ability to help determine the chronological process of the return shipment. RPM does not reimburse for costs returning damaged parts to our facility. We will send valid warranty replacement parts back to you at no additional charge. Parts not covered under RPM warranty provisions may incur shipping fees if you would like the original, damaged parts returned to you.

Back to Top


Home About RPM Products New Products F.A.Q.
Contact

2012 RPM RC Products. All rights reserved.